Graphical Caregiver Interface (GCI) Controls
36 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
7. Return the drainage bags to the drainage bag holders on the bed.
8. Follow the on-screen instructions.
– If during Zero or New Patient, the “Not Required Position” message shows on the GCI
screen, adjust the bed as applicable.
9. To protect the privacy of the patient, do not leave the patient weight displayed on the screen.
Return to the Home screen by pressing the Home control on the GCI screen.
BODY MASS INDEX (BMI) CALCULATOR
Body Mass Index (BMI) is a number calculated from a person's weight and height. BMI does not measure
body fat directly, but research has shown that BMI correlates to direct measures of body fat, such as
underwater weighing and dual energy x-ray absorptiometry (DXA). BMI can be considered an
alternative for direct measures of body fat.
To Activate
5. Press Weigh Patient. Follow the on-screen
instructions.
6. Press Accept or Re-weigh.
• Re-weigh—bed will repeat the steps to weigh the
patient
• Accept—stores the weight in the history
1. Press the Scale menu control on the GCI home screen.
2. Press Scale.
To Next Page
Loading...
