Bed Frame Features
74 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
GCI Indicators
The internal and external wireless modules both show the wireless status on the GCI screen. The
external wireless module will also show the wireless status on the module.
When you plug the bed into AC power, the color of the Wireless Status indicator on the GCI screen will
identify the wireless connectivity status. The Bed Location will also show for beds with the external
wireless module.
External Wireless Module
The external wireless module permits bed and surface data to be sent to a hospital’s information system
without a communication cable; the module does not communicate nurse call information. The
module has a Location feature that identifies the location of the bed when it is in a facility that has a
real-time location system (RTLS) installed. The data is sent through Baxter’s middleware solution,
SmartSync System, to the hospital’s information system. (For electrical specifications, see page 129.)
Wireless Status
• No indicator—the wireless module is not
operating correctly or it is not receiving
power.
• White outline—the wireless module is
operating correctly, but it is not connected to
the wireless network or it has not been
configured.
• Green bars—the wireless module is
operating correctly and is connected the
wireless network.
To Next Page
Loading...
Need help?
General
