98 pro+ Surface Instruction for Use (209196 REV 8)
Specifications
Environmental Conditions for Use
Environmental Conditions for Transport and Storage
AC/Mains Power Requirements
There are no user accessible fuses. Refer to the pro+ Service Manual
(209197) for fuse ratings and replacement procedures.
Applied Parts (in accordance with IEC 60601-1)
Weight 48-52 lb (22-24 kg)
a. The 80" (203 cm) length surface is for the 900 Bed with split siderails. The 76" - 87.5" (193
cm - 222 cm) length is for the other beds listed on page 1.
b. The 38.5" (98 cm) wide surface is for the 40" (102 cm) wide Centrella Smart+ Bed.
c. The 8.5" (22 cm) height surface is for the VersaCare Bed. The 9" (23 cm) height is for the
other beds listed on page 1.
Condition Range
Temperature 41°F to 95°F (5°C to 35°C)
Relative humidity 20% to 85%
Pressure 70 kPa to 106 kPa
Condition Range
Temperature -20°F to 140°F (-29°C to 60°C)
Relative humidity 15% to 90%
Pressure 50 kPa and 106 kPa
Condition Range
Rated voltage 100 - 240 V AC
Power/input 0.75 A
Frequency 50 - 60 Hz
Applied parts Applied parts
Matress top cover Surface bottom cover
Status indicator (non-
integrated surface)
Surface cable connector (integrated
surface)
Feature Dimension
To Next Page
Loading...
