46 pro+ Surface Instruction for Use (209196 REV 8)
VERSACARE Bed—pro+ Surface Installation Instructions
42. If the bed has a scale system, zero the scale. See the bed’s user
manual.
43. If the bed has the Obstacle Detect System, raise and lower the bed
to make sure the surface power cord does not interfere with the
system. See the bed’s user manual.
Warning—Put the power cord in a location where persons will not
trip over it, and away from bed mechanisms. Failure to do so could
cause injury or equipment damage.
44. Make sure the power cord is in a location where persons will not
trip over it, and away from bed mechanisms.
45. For surface models P3255A01 and P3255A02, make sure the
surface power cord is not in these locations:
Head End Foot End
Head End
To Next Page
Loading...
