50 pro+ Surface Instruction for Use (209196 REV 8)
VERSACARE Bed—pro+ Surface Installation Instructions
Surface Power Cord Routing (P3255A03 and P3255A04)
A label on the surface power cord
shows to plug the surface power cord
into the auxiliary outlet on the bed.
The surface power cord has magnets installed on the cord. The power
cord is routed along the patient-left side towards the foot-end of the
bed to the auxiliary outlet. Below is an overall view of the cord routing;
the numbered detail views correlate with Step 12 through Step 16 that
follow.
To Next Page
Loading...
