70 pro+ Surface Instruction for Use (209196 REV 8)
900 Beds
NOTES:
•Do not use cable ties to attach the power cord to the bed.
• A label on the surface power
cord shows the routing and the
attachment locations for the
surface power cord on the bed
frame.
The surface power cord has magnets installed on the cord. The power
cord is routed along the patient-right side of the bed to the head end of
the bed. Below is an overall view of the cord routing; the numbered
detail views correlate with Step 11 through Step 15 that follow.
LI900B2—Surface Power Cord Routing
To Next Page
Loading...
