Bioness BITS - Occupational Therapy; All Programs; Balance Therapy; Therapy Categories and Therapy Programs

17
Chapter 4 - Introduction to BITS Software Navigation
Occupational Therapy
The Occupational Therapy Discipline, features the therapy categories listed below. To access the
Occupational Therapy Discipline, press the Occupational Therapy Button. See Figure 4-2.
• Visual Scanning • Visual Motor
• Visual Pursuit • Charts
• Cognitive • Assessments
All Programs
The All Programs Discipline, features all therapy categories that are found in the BITS software
application (excluding Balance Therapy categories). To access the All Programs Discipline, press
the All Programs Button. See Figure 4-2.
• Visual Scanning • Visual Motor
• Visual Pursuit • Charts
• Cognitive • Assessments
Balance Therapy
The Balance Therapy Module features the therapy categories listed below. To access the Balance
Therapy Module, press the Balance Button. See Figure 4-2.
• Static Balance • Optokinetic Dynamic
• Dynamic Balance • Vestibular
• Optokinetic Static • Assessments
Therapy Categories and Therapy Programs
The BITS software application consists of 12 therapy categories, which are divided into over 60 different
Therapy Programs. The therapy programs are client interactive and provide visual and/or auditory feedback.
The therapy programs also generate records on patient performance for each session. Refer to BITS
Therapies Table on the next page to view a matrix of all BITS Therapy Categories and Programs.