biosystems BA 400 - Setup; Analyser

Menu Name Description
Adjustments/Test Gives access to the dierent options for adjusting and checking the dierent analyser
subassemblies
• Positioning
• Photometry
• Bottle level
• Motors, valves and pumps
• ermostatting
• Level detection
• Barcode
• ISE module
• Clot sensor
• Stress mode
Utilities Gives access to the utilities assembly:
• Conditioning
• Demo mode
• Analyser information
• Hardware versions
• Updating of rmware
Recording and
maintenance
Gives access to the report options
• Historical reports
• TAS report
• Preventive maintenance
Exit Exit options
• With Shutdown
• Without Shutdown
Help Help options
• Manuals
• About
6.4. Setup
6.4.1. Analyser
Enables the following options to be congured:
Selection of the water inlet: Select the water inlet mode for the analyser. e water may enter through two dif-
ferent channels which are mutually exclusive:
• Water tank
• Water mains
Deactivate buzzer: Check this option if you do not want the buzzer to sound when an alarm is indicated.
Deactivate other elements: Allows you to deactivate or activate the following elements separately. ese values
are stored in the analyser memory and applied when the user programme is executed.
• General cover of the analyser
• Reaction rotor cover
• Sample rotor cover
Service Manual
70