55
TABLE OF CONTENTS
Persons for whom this manual is intended ....................................................................8
Notices and warnings ....................................................................................................8
Software usage licence .................................................................................................12
Foreseen use ................................................................................................................13
1. Introduction
2. General description of the analyser
2.1. Sample rotor
2.2. Reagent rotor
2.3. Reaction rotor
2.4. Optical system
2.5. Wash station
2.6. Waste, distilled water and washing solution containers
2.7. Stirring arm
2.8. Dispensing arm
2.9. ISE module (optional)
2.10. Operating mode
3. Mechanical elements
3.1. Sample rotor
3.2. Reagent rotor
3.3. Reaction rotor
3.4. Pipetting arms
3.5. Stirring arm
3.6. Dispensing assembly
3.7. Structure
3.8. Fluid connections
4. Electronic elements
4.1. Distribution board - CIIM00047
4.2. Main board (CPU) - CIIM00046
4.3. Arm boards - CIIM00048
4.4. Tip detection board - CIIM00049
4.4.1. Level detection adjustment
4.5. Photometric control board- CIIM00050
4.6. Photometric readings board - CIIM00051
4.7. Rotor boards - CIIM00052
4.8. Fluid control board – CIIM00053
4.9. Syringe control board - CIIM00054
4.10. Loading of rmware
5. Fluidic elements
6. Service programme
6.1. Identication of the programme parts.
6.1.1. List of common icons
6.1.2. Vertical bar icons list
6.1.3. Explanation of the adjustment text box
To Next Page
Loading...
