PowerWave Operator’s Manual 3-51
EXAMPLE 4:
In the case of competitive reactions, converting absorbance data to percent
B/B
0
can be: (OD/Std1)*100. This would divide all the wells by Std1,
presumably the 0 standard, and multiply by 100.
Go to TVAR, choose OD. Select STD1 from MAP. At transformation formula
screen, enter: (OD/TVAR)*100.
GENERAL FORMULA
A general formula is any desired data reduction that may accompany other
reports. This feature is not used in the current version of the reader.
To Next Page
Loading...
