Biotek PowerWave - Page 144

B-8 Computer Control
Number of
bytes
Data
1
Checksum for this file structure. Loop through each byte of the following
array, starting at 2. Put that number in Array 1. (This is the checksum for
this structure.)
2 - 7
NOT USED
8 - 29
NOT USED
30 Options Bit Set to 1 Bit Set to 0
Bit 6: dual
wavelength
single wavelength
31 Options Bit Set to 1 Bit Set to 0
Bit 4: NOT USED
Bit 5: NOT USED
Bit 6: NOT USED
Bit 7: TTL minutes number of reads
32
NOT USED
33-34
NOT USED
35-36
NOT USED
37
NOT USED
38 - 45
NOT USED
46 - 49
NOT USED
50 - 52
Filter #1 (ASCII filter #)
Table B-4. Byte Assignment for Parameter Setup File