Biotek PowerWave - Page 145

Appendix B B-9
Number of
bytes
Data
53 - 55
Filter #2 (ASCII filter #)
56
Read mode (0 or 2)
0 Read-and eject
2 Repeated reads\Kinetics
57
NOT USED
58-59
NOT USED
60-61
Read timing value 11 - 9999 seconds between repeated reads on single
wavelength; 21 - 9999 seconds on dual wavelength
62-63
Repeated-reads count (1 - 9999]
64
Map number (0-5)
0 = user constant
1 = full blank
2 = half blank
3 = quarter blank
4 = 8-rows blank
5 = 12-columns blank
65-66
User blank constant value (0.000 to 2.999)
67-162
Blanking map (If constant blank
is being used, all the wells would
be 00000000.)
sector number (1-12)
Bits 0-3: unused
Bit 4: unused
Bit 5: 1 suppresses the reading;
0 enables the reading
Table B-4. Byte Assignment for Parameter Setup File (Cont.)