Why order sorting filter wheel failed positional verify in Biotek Measuring Instruments?
If the order sorting (bandpass) filter wheel failed positional verify on your Biotek Measuring Instruments, it could be due to: * The filter wheel being obstructed by the motor gear. * The motor gear being loose on the motor shaft.
Why carrier x-axis failed positional verify on Biotek PowerWave?
If the carrier x-axis failed positional verify on your Biotek Measuring Instruments, it could be due to a dirty rail or dry bearings causing too much friction.
Why carrier y-axis failed positional verify on Biotek PowerWave Measuring Instruments?
If the carrier y-axis failed positional verify on your Biotek Measuring Instruments, this may be caused by dirty rail or dry bearings causing too much friction.
Overview of the PowerWave reader-assay system for research and development use.
Details on the physical and functional components of the PowerWave reader.
Technical specifications including optical performance, display, and dimensions.
Information on how to contact Bio-Tek for technical assistance and support.
Instructions for safely unpacking and preparing the instrument for use.
Procedure to check or change the software wavelength settings.
Guidance on replacing the reader's lamp bulb when necessary.
Instructions for configuring the instrument for different voltage ranges.
Configuration settings for setup, output, and read preferences.
Description of the main interface and soft key options.
Setting up assay parameters including method, map, formula, and curve fit.
Step-by-step guide for performing a microplate read.
Options for generating and printing various reports and assay lists.
Tests to confirm initial and ongoing instrument performance.
Navigating the utility menu to access performance tests and calibration.
Procedure to confirm instrument alignment, repeatability, and accuracy.
Method for testing the instrument's linearity with varying absorbances.
Steps for decontaminating the instrument before shipping or servicing.
Using Bio-Tek software packages to control the reader's functions.
Details on programming the computer to control the reader via serial port.
List of error codes, their potential causes, and troubleshooting guidance.
General| Brand | Biotek |
|---|---|
| Model | PowerWave |
| Category | Measuring Instruments |
| Language | English |
To Next Page
