3 Specifications of the Devices
Page 47
3.7.6 Loudspeaker Output Connectors 4Xe
The pin-out of the SPEAKON connectors are as follows:
SPEAKON Channel 1
Pin Signal
1+ Channel 1+
1- Channel 1-
2+ Channel 2+
2- Channel 2-
SPEAKON Channel 2
Pin Signal
1+ Channel 2+
1- Channel 2-
SPEAKON Channel 3
Pin Signal
1+ Channel 3+
1- Channel 3-
2+ Channel 4+
2- Channel 4-
SPEAKON Channel 4
Pin Signal
1+ Channel 4+
1- Channel 4-
The dual assignment of the SPEAKON-jack pins in channel 1 and 3 allow for the use of a single SPEAKON
plug for bridged operation (cables with 2-conductors) or Bi-Amping (cables with 4-conductors).
3.7.7 Clip Limiter
The 4Xi and 4Xe series feature a switchable Clip Limiter (DIP-switch section 3.7.9).
The clip limiter reduces signal peaks to avoid unwanted signal distortion. It activates 0.5 dB below a distor-
tion of 1% THD.
An additional DIP switch (refer to section 3.7.9) sets the clip limiter to an either Hard (faster) or Soft (slower)
response.
c
2016 Bittner Audio Int. GmbH
To Next Page
Loading...