Page 94
3 Specifications of the Devices
3.14.10 Software & Files
There are five different categories of data files stored on the internal flash disk or a SD card:
Category Storage Location
Firmware Internal Flash Disk
System Settings Internal Flash Disk
Web Interface SD Card
Configurations SD Card
Logbook Internal Flash Disk
The SD card is of the off-the-shelf type. If the card is missing, it will be indicated in the LCD in short
intervals.
The SXL II will operate without the SD card, however, the web interface will not be available and only
configuration 0 may be recalled.
3.14.10.1 FTP
The files may be transferred and downloaded from any computer by using FTP (File Transfer Protocol). Any
FTP program (e.g. FileZilla) should work. For more advanced users it is also feasable to use the command
line.
Caution
The default login is:
Name: sxl
Password: 11111
Do not use caps for the name. The password is five times the figure „one“.
The content of the SD card appears after a successful connection to the FTP program. For safety reasons the
files of the internal flash disk will not be viewable.
However, to transfer files to the internal flash disk the data need to be copied to the SD card. After a re-start
the SXL II will copy the data automatically to the internal flash disk.
3.14.10.2 Firmware
The firmware of the SXL II is a file with nearly 1 MB and built as follows:
sxl <firmware version> _APP . s19
Example: sxl0465_APP.s19
After connecting to a FTP program, the data files of the SD card will be visible. The new firmware will be
automatically copied to the root directory. The transmission will take only a few seconds and is indicated on
the LCD of the SXL II.
The SXL II needs to be re-started. This may be comfortably done one of four ways:
• Web Interface - The function is located in the „Misc“ menu (refer to section 3.14.8.8)
• Transmission of the „restart.cm“ file per FTP. The FTP connection will be automatically closed after the
file transfer.
c
2016 Bittner Audio Int. GmbH
To Next Page
Loading...