3 Specifications of the Devices
Page 57
3.11 XT Series
3.11.1 General Information
Simply the Best.
Perfect frequency response and sound. Individually tested.
100 V transformers are an essential part of fixed installations. The possibility to connect many loudspeakers
in parallel to a single amplifier and to have them galvanically separated is of undisputed significance. To
save costs, however, low quality transformers are being used that offer only low fidelity in the lower and
higher frequency range.
• Sensible power granulation
• Ultra linear frequency response
• Flux free quality
• Small size
The XT transformers are being used in the Bittner Audio XV and XV DC 100 Volt series. Bittner quality is
available in every single component.
3.11.2 Connections
Figure 3.34: XT Transformer - Connection Wires and Sticker
The XT transformer comes with 4 connection wires, each with a unique color. A sticker states the color of
the (+) pin.
100V: Two „thin“ twisted pair wires
Low impedance (4 Ohm): Two „thicker“ wires
c
2016 Bittner Audio Int. GmbH
To Next Page
Loading...