Page 88
3 Specifications of the Devices
Login Data
Username and Password may be changed arbitrarily.
Device and Channel Labels
For a better identification, the SXL II and the amplifiers may be labeled.
3.14.8.9 Log
The SXL II logs every important event on its internal flash disk. The amount of recordable events is about
13000.
The SXL works with the Syslog Protocoll (refer to section 3.14.8.8). This protocol subdivides the events into
priorities:
Priority
Emergency
Alert
Critical
Error
Warning
Notice
Info
Filter
The amount of the logbook entries may be recalled according to these priorities. In addition, all entries may
be limited to a certain amount of time.
The Parameter IP to show is a subnet mask. It filters the readout to show only SXL II units belonging to a
certain range of IP addresses.
Message
It is possible to store user messages (max. of 70 characters) in the log. This is useful for instance, to note
the start and end of maintenance work.
Export
For storage reasons, the logbook may be copied to a control computer from the flash disk of the SXL II.
3.14.8.10 Home
Home gives an overview of all available SXL II in a system, indicating IP address, name and status. It is also
possible to navigate to the different pages of an SXL II.
Caution
Status refers only to the condition of the SXL II. It will not show the condition of an amplifier.
c
2016 Bittner Audio Int. GmbH
To Next Page
Loading...