Modules & Options
7 - 16 Wireless LAN Module (Windows 8)
7
If you are in Icon View do the following:
1. Open the Control Panel.
2. Click/tap Network and Sharing Center.
3. Click/tap Change Adapter Settings.
4. Double-click/tap Wi-Fi.
5. A list of available access points will appear.
6. Double-click/tap an access point to connect to it (or click/tap it and click/tap
Connect).
7. Enter a network security key (password) if required, and click/tap Next.
8. You can choose to share or connect to devices or not.
9. Select any connected network and click/tap Disconnect to disconnect from a
connected access point.
To Next Page
Loading...