Borger Bioselect RC 40 - Training and Instruction; Sample Training Topics

To Next Page

To Previous Page

1.4 Training and instruction

As the operator, you are obligated to inform and, if necessary,

instruct your operating personnel in regard to the applicable legal

and accident prevention regulations, as well as the available safety

equipment on the Börger machine.

This obligation also applies to all other safety equipment on and

around the Börger machine. The different technical qualifications

of the operating personnel must be taken into account. The oper-

ating personnel must have fully understood the instructions, and

adherence to the instructions must be guaranteed. Only then can

your personnel work safely and be fully aware of associated risks.

Adherence to instructions must be checked on a regular basis. As

the operator, you should therefore have each instructed staff

member confirm their training participation in writing.

Sample training topics and a sample form for confirming participa-

tion in the training/instruction can be found on the following pages.

Börger GmbH, their regional subsidiaries or your local sales

partner will be happy to help you regarding staff instruction. They

can also carry out training on the functionality, commissioning,

maintenance and repair of the Börger machine, on request.

1.5 Sample training topics

1. Operational safety

— Accident prevention regulations

— General legal regulations

— General safety instructions

— Measures in the event of emergencies

— Safety instructions for operating the Börger machine

— Using the safety equipment on the Börger machine

— Safety equipment on and around the Börger machine

— Explanation of symbols and signs

___________________________________________________

General information

BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com10