9.4 Spare parts list
WARNING!
Risk of injury when using unsuitable spare parts!
The use of unsuitable spare parts can cause malfunctions which
can lead to severe injury, including death, and to significant mate-
rial damage.
— Only use suitable spare parts.
— Always contact the manufacturer if in doubt.
The spare parts list is universal. The positioning of the parts can
be seen in the assembly drawing. The parts used in your Börger
machine are defined according to the type designation and all the
additional specifications in the data sheet.
Pos. Art. no. Item description Quantity
1 40201 Pipe casing RC 40 1
2 30311 Drive unit 1
3 30400 Adapter plate 1
4 30220 Guide rail RC 30/RC 40 3
5
30108-2 Wedge wire screen, 0.25 mm slot opening width, with rotation lock sup-
ports
1
30102-1 Wedge wire screen, 0.50 mm slot opening width, with torque profile
30107-2 Wedge wire screen, 0.75 mm slot opening width, with rotation lock sup-
ports
6 10057915 Brush auger 1
7 50672 Press filter RC50 HP slot opening width 0.5-1 1
8 50902 Foam rubber sealing washer 1
9 30688 Multi Disc cap 1
10 50690 Multi Disc plate with peeling tabs 1
11 50670 O-ring 400x7 1
14 30445-1 Threaded rod 1
15 30436 Drive sleeve 1
16 30429 Drive flange 1
17 Z50285 Washer DIN EN ISO 7089 A8.4x16x1.6-A2 4
18 30121 Drive block 1
19 30118-275 Drive pin 1
20 Z10203 Self-locking slotted nut with polyamide clap ring, M40x1.5 1
21 30693 Carrier plate 1
Appendix
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com180
To Next Page
Loading...