2.8.5 Optional monitoring devices
If the Börger machine is equipped with additional monitoring
devices, then the corresponding safety instructions can be found in
the manufacturer’s operating manual in the appendix.
If your Börger machine was supplied with such monitoring devices,
you must ensure that these devices function correctly.
2.9 Markings and signs
The symbols and information signs below are located in the work
area. They refer to the immediate environment in which they are
attached.
WARNING!
Danger due to illegible signage!
Over time, stickers and signs can get soiled or become illegible
due to other reasons, so that dangers are not recognized and
necessary operating instructions cannot be observed. This poses
a risk of injury.
— Do not remove any safety notes, warnings and operating
instructions.
— Keep them completely legible.
— Replace damaged signs or stickers immediately.
Safety
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 29
To Next Page
Loading...