Be sure to read and follow all instructions:
— on safety,
— on operation and control,
— on installation, repairs and maintenance.
Ä
Chapter 2.12
“Safety instructions for maintenance and rectifying malfunc-
tions” on page 37
1. Observe the assembly drawing, the spare parts list and the
wear parts list when carrying out repairs or ordering spare
parts.
Ä
Chapter 9.2 “Wear parts” on page 174
Ä
Chapter 9.4 “Spare parts list” on page 180
2. Read and strictly comply with the applicable regulations,
manufacturer's safety data sheets and operator's instructions
in respect of the storage, handling, use and disposal of oils,
grease and other chemical substances.
3. Dispose of operating materials and replaced parts in a safe
and environmentally-friendly manner.
Ä
Chapter 7 “Disposal” on page 170
6.1 Machine care
Appropriate machine care helps to maintain the functionality of the
Börger machine in the long term. In general, regular cleaning of
dust and deposits from all surfaces is sufficient.
CAUTION!
Health hazard due to residues of dangerous medium inside
and on the Börger machine!
There is an increased health hazard from contact with the
medium and contaminated components.
Generally, the following applies:
— When using dangerous or health-endangering media, take all
necessary safety measures when performing work on the
Börger machine.
— Avoid direct contact with the medium (skin/eye contact, swal-
lowing, inhaling).
— Remove spillage from your skin without delay.
— Do not store or consume beverages, food or tobacco in the
working area.
Maintenance and repairs
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 111
To Next Page
Loading...