2.8 Description of the safety equipment
WARNING!
Risk of fatal injury if safety devices are not fully functional!
Non-functional or overridden safety devices may cause severe
injuries, including death.
— Check whether all safety devices are functional and correctly
installed before starting work with the machine.
— Never override or bypass safety devices.
— Ensure that all safety devices are accessible at all times.
The Börger machine is equipped with the required safety equip-
ment according to the applicable legal guidelines in the country of
manufacture, current state-of-the-art technology and recognized
safety regulations.
2.8.1 EMERGENCY STOP
When pressing the EMERGENCY STOP button, the machine is
shut down by the energy supply being switched off or the machine
being mechanically disconnected from the drives. Once the
EMERGENCY STOP switch has been activated, it must be turned
in order to reset it and restart the machine.
WARNING!
Risk of fatal injury if the plant is switched back on uncon-
trolledly or without authorization!
Switching the machine on without authorization or uncontrolledly
can cause serious injuries.
— Ensure that the cause of the EMERGENCY STOP has been
eliminated and all safety features are installed and functional
prior to a restart.
— Do not reset the EMERGENCY STOP switch before the
danger has been eliminated.
2.8.2 Clamping unit cover
The clamping unit must be secured by a fixed cover against
reaching in.
Safety
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 27
To Next Page
Loading...