Be sure to read and follow all instructions:
— on safety,
— on operation and control,
— on installation, repairs and maintenance.
Ä
Chapter 2.12
“Safety instructions for maintenance and rectifying malfunc-
tions” on page 37
— Shut down the Börger machine and downstream and upstream
system components.
Ä
Chapter 5.4 “Downtimes” on page 100
— Secure the Börger machine against unauthorized or uncon-
trolled reactivation.
Ä
Chapter 2.7 “Securing the machine
against restart” on page 26
1. Close all valves and shut-off devices so that no medium can
enter the working chamber of the Börger machine.
2. Release the pressure and empty the Börger machine via a
drainage device (if available).
— Collect any leakage of medium by suitable means and
dispose of it in accordance with the applicable local guide-
lines.
3. Close the drainage device, if available.
6.1.3 Internal cleaning
WARNING!
Severe injury due to residual pressure!
Despite having depressurized the Börger machine, it may be
under residual pressure in the event of congestion or lump forma-
tion in the medium.
— Take extra care when removing the flange connections and
maintenance openings to prevent accidents caused by the
release of residual pressure.
Maintenance and repairs
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com116
To Next Page
Loading...