2.11 Safety instructions for operating personnel
The Börger machine may only be operated while it is in perfect
working condition and only for its intended purpose, in a safe and
risk-conscious manner having regard to this operating manual. All
malfunctions must be rectified immediately, especially those
affecting safety.
Every person assigned with commissioning, operation or mainte-
nance work must have fully read and understood this operating
manual beforehand – specifically
Ä
Chapter 2 “Safety”
on page 13. Consulting the manual during work is already too late.
This applies especially to personnel that only work occasionally on
the Börger machine.
The operating manual must always be kept accessible next to the
Börger machine.
No liability will be assumed for any damage and accidents caused
by non-compliance with the operating manual.
Adhere to the applicable accident prevention regulations and all
other generally recognized safety regulations and guidelines for
occupational health at work.
Clearly specify the responsible parties for the various maintenance
and repair tasks and adhere thereto. Only then can handling errors
be avoided, especially in dangerous situations.
The operator must make personal protective equipment mandatory
for operating and maintenance personnel. This applies to safety
shoes, protective goggles and protective gloves. Always wear this
protective equipment when working on the Börger machine.
Keep long hair tied and do not wear loose clothing or jewelry.
There is always a danger of getting caught, pulled in or dragged
along by moving components.
Safety
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 31
To Next Page
Loading...