8.2 Control unit
To consistently achieve an optimal separation result and to prevent
limits from being exceeded and damage from occurring as a result,
a control unit can control the interaction between the feed pump,
the drive at the Bioselect and any overpressure protection devices,
if applicable.
Operating manual of the control unit
— Pay attention to all the instructions and safety regulations contained in
the operating manual of the control unit in the appendix.
8.3 Fill level sensor for conical piles
NOTE!
Level indicator
— A fill level sensor can be used to control the fill level for the
ejected thick matter.
Operating manual - Fill level sensor
— Pay attention to all the instructions and safety regulations contained in
the operating manual of the fill level sensor in the appendix.
Accessories
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 173
To Next Page
Loading...