6.2.3 Lubricating the adjustment mechanism and the bearing
NOTE!
Lubricating the bearing and the adjustment mechanism
The adjustment mechanism and the bearing must be lubricated
with a suitable multi-purpose grease at regular intervals!
— Lubricate the adjustment mechanism and the bearing every
50 operating hours, at the latest after one week!
— The adjustment mechanism and the bearing can be lubricated
through the openings (1, 2) in the cover.
NOTE!
Only lubricate the bearing during operation!
— Only lubricate the bearing (1) during separator operation.
— Only apply the lubricant with low pressure.
NOTE!
Only apply the lubricant to the adjustment mechanism with
the unit at standstill!
— Only apply the lubricant to the adjustment mechanism (2)
when the unit is at a standstill.
Maintenance and repairs
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 127
To Next Page
Loading...