5 Operation
WARNING!
Risk of injury as a result of improper operation!
Improper operation may cause severe injury and considerable
material damage.
— Prior to commissioning, ensure that all installation work is per-
formed and completed as per the information and notes pro-
vided in this manual.
— Ensure that all operating steps are performed as per the infor-
mation and notes provided in this manual.
— Ensure the following before starting work:
— Ensure that all covers and safety features are installed
and function correctly.
— Ensure that nobody is in the hazardous area.
— Never bridge or disable safety features during operation.
NOTICE!
There is a danger of considerable material damage if the
limits are not complied with!
Failure to comply with the limits can cause permanent damage to
the Börger machine and its components.
— The values may neither exceed nor fall below the limits speci-
fied in
Ä
Chapter 3.3 “Technical data” on page 55 of the
standard operating manual and the specifications on the data
sheet.
— On Börger machines that operate with a frequency converter,
make sure that the operating speed is sufficiently below the
maximum permissible speed (for speed limit based on
machine configuration, see enclosed data sheet).
— Take all necessary precautions to ensure that the permissible
differential pressure between the inlet and outlet of the Börger
machine is not exceeded.
— Make sure that the pressure on the outlet does not exceed the
permissible pressure of the pipe system and the Börger
machine, and not overload the drive and its elastic connec-
tions.
— The temperature values according to the data sheet may not
exceed or fall below the limits. Double-check this.
Operation
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 93
To Next Page
Loading...