5.2 Complete commissioning
The Börger machine can be operated properly when all functions
run correctly and no leaks are detected.
NOTE!
Checklist for commissioning
A checklist for commissioning the Börger machine can be found
in the appendix.
Ä
Chapter 9.5 “Checklist for commissioning” on page 186
5.3 Continuous operation
NOTICE!
Risk of material damage due to imbalances!
— Persistent encrustations of substrate residue between the
brush auger and the wedge wire screen can result in the
wedge wire screen being deformed and permanently dam-
aged by the rotation of the brush auger when put back into
operation.
— Foreign bodies (e.g. stones) can damage the filter and the
rotation lock.
Check for smooth running!
— Ensure that no imbalances are caused by improper cleaning,
substrate residue or foreign bodies.
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 37.
Börger separators are suitable for continuous operation.
1. The specified operating cycle for which the Bioselect was
designed can be found in the enclosed data sheet.
2. Observe the maintenance and inspection intervals according
to
Ä
Chapter 6.2 “Maintenance and inspection” on page 120.
Operation
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 99
To Next Page
Loading...