9 Appendix
9.1 Data sheet
Data sheet
The data sheet is enclosed separately with the operating manual.
The data sheet contains all relevant data for your Börger machine or unit.
— Especially consider the operating conditions and limits mentioned in the
data sheet. They may deviate from the information mentioned in this oper-
ating manual if the machine has special equipment.
9.2 Wear parts
WARNING!
Risk of injury when using unsuitable spare parts!
The use of unsuitable spare parts can cause malfunctions which
can lead to severe injury, including death, and to significant mate-
rial damage.
— Only use suitable spare parts.
— Always contact the manufacturer if in doubt.
The following wear parts list includes the quantity, designation and
position number of the elements that are replaced during the corre-
sponding repair work. Also observe the assembly drawing
according to
Ä
Chapter 9.3 “Assembly drawing” on page 177 and
the spare parts list according to
Ä
Chapter 9.2 “Wear parts”
on page 174.
The required number of individual parts will to some extent depend
on your Börger machine. Take note of the number of parts
removed during repair work, cf. also figures in the repair chapters.
Appendix
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com174
To Next Page
Loading...