Borger Bioselect RC 40 - Markings and Signs to be Attached by the Operator

Meaning:
Nameplate according to directive 2006/42/EC (machinery directive)
Location:
In a clearly visible position on the motor plate of the separator
CE marking not applicable for incomplete machines
where only a declaration of incorporation may be delivered, and in certain other cases.
Meaning:
Grounding (bore hole for ground screw or terminal)
Location:
On one of the mounting rails or on the base frame
Meaning:
Do not touch rotating parts
Location:
In a clearly visible position on the counter bearing casing
Meaning:
Please read the operating manual carefully before performing any
activity involving the device! Keep for future reference!
Location:
In a clearly visible position on the packaging of the operating manual
2.10 Markings and signs to be attached by the operator
The operator may also be required to attach additional markings
and signs on or around the Börger machine.
These additional markings and signs may relate to regulations for
wearing personal protective equipment, for example.
Safety
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com30