Tool:
n
Grease gun
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 37.
1. Apply suitable lubricant to the opening 2 using an adequate
grease gun in order to lubricate the adjustment mechanism.
2. Apply suitable lubricant to the opening 1 using an adequate
grease gun in order to lubricate the bearing.
6.3 Repairs
WARNING!
Risk of injury due to inadequate troubleshooting, mainte-
nance and repair work!
Inadequate troubleshooting, maintenance and repair work can
lead to severe injury and significant material damage.
— To the extent necessary, amply secure the surrounding area
when performing maintenance. Cordon off the working area
with a red and white safety chain and a warning sign.
— Ensure sufficient installation space before commencing work.
— Keep the installation site clean and tidy! Loosely stacked or
scattered components and tools cause accidents.
— Ensure correct installation where components have been
removed, reinstall all fastening elements and observe the
tightening torques of screws.
— Ensure the following before putting the machine back into
operation:
— Ensure that all troubleshooting, maintenance and repair
work is performed and completed as per the information
and notes provided in this manual.
— Ensure that nobody enters the hazardous area.
— Ensure that all covers and safety features are installed
and function correctly.
Maintenance and repairs
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com128
To Next Page
Loading...