NOTE!
Pneumatic adjustment
As a rule, the pressure on the Multi Disc in the version with pneu-
matic adjustment is adapted by means of a control unit.
3.3 Technical data
Börger machines are configured individually for the application
requirements. This leads to a wide range of variations that have
been optimized for specific applications. Therefore, only the data
of some of the standard versions can be listed here as examples.
Detailed specifications for your Börger machine or unit can be
found in the data sheet and the individual dimensional drawing
sent when the machine was ordered.
Please contact Börger customer service if you require a copy of
this drawing.
Product Description
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 55
To Next Page
Loading...