6.3.3 Replacing the mechanical seal
NOTICE!
Risk of material damage due to incorrect handling of
mechanical seals!
Make sure not to damage the sealing surfaces of the new seal
faces.
— The sealing surfaces must be clean and should not be
scratched.
NOTICE!
Risk of loss of seal function due to oil/grease on the O-rings
of mechanical seals!
Material damage resulting from loss of seal function
— The O-rings of a mechanical seal must be installed without oil
or grease.
NOTE!
Spray cleaner (degreaser)
Generally, the seal faces equipped with O-rings can be inserted
dry.
— In order to ensure that they are free of grease and to aid
insertion, the O-rings can be sprayed lightly, depending on
their resistance, with a quickly-volatilizing spray cleaner
(degreaser) that leaves no residue.
Maintenance and repairs
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 137
To Next Page
Loading...