2.7 Securing the machine against restart
WARNING!
Risk of fatal injury if the plant is switched back on uncon-
trolledly or without authorization!
Switching the Börger machine on without authorization or uncon-
trolledly can cause serious injuries.
— Before switching back on, make sure that all safety devices
are fitted and fully functional and that staff are not at any risk.
— Always adhere to the sequence to secure the plant to prevent
it from being switched back on.
Ä
Chapter 2.7 “Securing the
machine against restart” on page 26
1. Shut off the media supply by closing the respective shut-off
valves.
2. Shut off the energy supply.
3. Inform the person responsible that work is being carried out
in the danger area.
4. Attach a sign to the control cabinet to indicate that work is
being carried out in the danger area and that switching on is
prohibited. The sign must include the following information:
— Switched off on:
— Switched off at:
— Switched off by:
— Note: Do not switch on!
— Note: Do not switch on before ensuring that personnel are
at no risk.
Safety
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com26
To Next Page
Loading...