6.1.1 Cleaning the outside
CAUTION!
Risk of burns!
Particularly when used outside at correspondingly high ambient
temperatures and high substrate temperatures, the Bioselect
casing and the individual parts of the separator can become hot
and should not be touched during operation.
Stop the feed and shut down the Bioselect prior to any mainte-
nance and repair work on the Bioselect and the accessories.
Allow the system to cool down completely, if necessary, before
carrying out repair and maintenance work.
Avoid dust formation as this contributes to heat build-up.
Protective equipment:
n
Light respiratory protection
Be sure to read and follow all instructions:
— on safety,
— on operation and control,
— on installation, repairs and maintenance.
Ä
Chapter 2.12
“Safety instructions for maintenance and rectifying malfunc-
tions” on page 37
— Shut down the Börger machine and downstream and upstream
system components.
Ä
Chapter 5.4 “Downtimes” on page 100
1. Keep all markings on the Börger machine in a legible state at
all times.
2. Only clean the outside of the Börger machine by wiping or
brushing it down. Use lint-free cleaning cloths.
3. When required, use a standard aqueous industrial cleaner.
Maintenance and repairs
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 113
To Next Page
Loading...