NOTICE!
Improper cleaning of the Börger machine can lead to mal-
functions and damage!
— Do not use water jets.
— Do not use aggressive cleaning agents, solvents or sand-
paper, as these can damage the metallic and plastic surfaces,
casing coating and seals.
— Do not use metal objects such as scrapers and screwdrivers
for cleaning coated machine parts.
— Never clean sensitive components with hard scrubbing and
strong mechanical pressure.
— Do not use a vacuum cleaner or a hand brush with plastic
bristles etc. to clean electronic components because the pro-
duction of static electricity can damage the electronic compo-
nents.
ENVIRONMENT!
Danger due to incorrect handling of environmentally haz-
ardous substances!
Inappropriate handling of environmentally hazardous substances,
especially incorrect disposal, can cause significant damage to the
environment.
— Especially water-polluting materials such as grease and lubri-
cating oil must not pollute the soil or enter the sewage system
during installation, repair and maintenance work.
— These materials must be collected, stored, transported
and disposed of in suitable containers.
— When handling oil, grease and other chemical substances,
pay attention and adhere to the applicable regulations and
safety data sheets issued by the respective manufacturer
relating to storage, handling, correct use and disposal.
— Comply with the legal obligations regarding waste avoidance
and the proper recycling/disposal of waste during all work
Maintenance and repairs
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com112
To Next Page
Loading...