6.3.8 Modifying the position of the auger adapters
1 Brush auger 4 Hexagon socket head cap screws
2 Hexagon socket head cap screws 5 Auger adapter
3 Auger adapter A Centering elevation
Tightening torques approx. [Nm] approx. [ft-lbs]
M12 hexagon head screws, stain-
less steel
65 48
— Read and follow the safety instructions detailed in
Ä
Chapter
2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 37.
— Empty the Börger machine as described in
Ä
Chapter 6.3.1
“Notes on repair work” on page 129.
— Shut down the Börger machine and downstream and upstream
system components as described in
Ä
Chapter 5.4 “Down-
times” on page 100.
Drive flange,
auger adapter
Maintenance and repairs
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com164
To Next Page
Loading...