Fill quantity
Design
(mounting position)
Intermediate chamber
approx. [l] approx. [gal]
M1
(upright)
0.8 0.21
NOTE!
Changing the lubricant
Observe the detailed information and instructions on changing
the lubricant as described in the lubricant list and in the data
sheet regarding the lubricants used.
NOTE!
Intervals for changing the lubricants
— The intervals for changing the lubricants can vary significantly
and be reduced considerably depending on the operating con-
ditions, such as high levels of humidity, high temperatures,
temperature variations, aggressive atmospheres etc.
Fill level check and change of lubricants at the drive
Operating manual of drive manufacturer
Pay particular attention to all instructions
— on safety,
— on operation and control,
— on repairs and maintenance,
— in the operating manual of the drive manufacturer.
RC 40
Maintenance and repairs
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com126
To Next Page
Loading...