NOTICE!
Risk of material damage due to imbalances!
— Persistent encrustations of substrate residue between the
brush auger and the wedge wire screen can result in the
wedge wire screen being deformed and permanently dam-
aged by the rotation of the brush auger when put back into
operation.
— Foreign bodies (e.g. stones) can damage the filter and the
rotation lock.
Check for smooth running!
— Ensure that no imbalances are caused by improper cleaning,
substrate residue or foreign bodies.
NOTICE!
Risk of damage caused by frost!
Frost can cause damage to the Börger machine.
— Protect the Börger machine and its connections against frost.
NOTE!
Contamination caused by production residues!
Börger machines may contain residues from the manufacturing
process, e.g. grease or oil. Contamination caused by packaging
and transport cannot be ruled out.
— If necessary, thoroughly rinse the Börger machine with a suit-
able agent as part of the test run (
Ä
Chapter 5.1 “Commis-
sioning” on page 95) while adhering to the limits before com-
missioning the machine for the first time.
Operation
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com94
To Next Page
Loading...