Replacing the filter press channel:
Pos.
no.
Designation Quantity
3 Press channel or filter press channel 1
35 O-ring 1
38 Foam rubber sealing washer 1
NOTE!
Spare parts orders!
The data below are required:
— Serial number
— see nameplate
— Type code
— according to data sheet
(Important! - comparison with serial number!)
Börger GmbH will then obtain the information for the appropriate
spare parts for you from the production documents of your
machine.
— Record all modifications made to the equipment after the ini-
tial delivery, such as changes to rotating components (type,
material) or seals.
— In order to avoid incorrect deliveries, always quote all modifi-
cations made when ordering spare parts.
Appendix
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com176
To Next Page
Loading...