Operating manuals of electronic parts
Pay particular attention to all instructions
— on safety,
— on operation and control,
— on repairs and maintenance,
— in the operating manuals of electronic parts in the appendix.
NOTE!
Adhere to the prescribed intervals for regular maintenance
and inspections of the electrical system and/or components
or to those intervals specified herein and in the operating
manuals of the components.
— The electrical system may only be opened, maintained and
repaired by qualified electricians, while having proper regard
to the attached electric circuit diagrams.
— Carry out modifications, repairs, maintenance and trouble-
shooting on the control unit only when the electrical system is
switched off. Accidental restarting of the unit must be pre-
vented completely.
— To the extent necessary, amply secure the surrounding area
when performing maintenance. Cordon off the working area
with a red and white safety chain and a warning sign.
— Suitable workshop equipment as well as specified special
tools are essential for carrying out maintenance work.
Ä
Chapter 9.4.1 “Tools / installation aid” on page 184
— Also observe any
— supplementary operating manuals
— operating manuals of the components
— Operating manuals of electronic parts
in the appendix.
— Protect the electronic components from moisture and impuri-
ties. Clean the electronic components with suitable agents
according to the manufacturers' operating manuals only. Do
not use aggressive cleaning agents to clean the surface. Use
lint-free cleaning cloths.
— Dispose of any replacement parts in a safe and environmen-
tally-friendly manner.
Safety
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com36
To Next Page
Loading...