BBP™31 Sign & Label Printer
User Guide
8-3
Printer Maintenance
Cleaning the Printer
Cleaning the Printer
Cleaning Residue from Printer and Keyboard
Whenever performing any maintenance on the printer, you should also clean any
residue caused by the media.
Materials Required
• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
• Lint-free Cloth
• Isopropyl Alcohol
• Safety Glasses
To clean residue from the printer:
Always wear safety glasses when using compressed air.
1. Remove power and media from the printer (see “Removing Power and Media
from Printer” on page 8-1).
2. With safety glasses on, spray compressed air on any parts of the printer and
keyboard that have built-up residue.
Note: If compressed air is not available, use a lint-free cloth lightly moistened
with isopropyl alcohol and wipe off residue.
3. If necessary, use a moistened, lint-free cloth to clean the keyboard keys.
4. Replace the ribbon and tape.
5. Close all covers and plug in the power cord.
To Next Page
Loading...
