Brady BBP31 - Printing Mirror-Image Labels; Canceling a Print Job

BBP™31 Sign & Label Printer User Guide 5-5
Printing Labels
Canceling a Print Job
Printing Mirror-Image Labels
Use this procedure to print labels suitable for reading in a mirror or through the
back of the label.
To print a mirror-image label:
1. With a defined label in the Editor, select Print .
2. From the Print dialog box, select Mirror .
3. Select Start Print to start printing the labels. The labels are printed
mirrored across the media.
Note: The Mirror setting is not retained for the next print job. The Mirror setting
must be reselected each time you want to print mirror-image labels.
Canceling a Print Job
This procedure assumes that a print job has been initiated and is currently
printing.
To cancel a print job:
1. In the Printing Status dialog box, select Cancel . The printer immediately
stops printing, displays a print job cancelled message, and cuts the media.
Note: Once Cancel is selected, the print job cannot be resumed.