Brady BBP31 - Compatible Applications; System Specifications

1-2 BBP™31 Sign & Label Printer User Guide
Compatible Applications
Compatible Applications
The BBP™31 Sign & Label Printer is compatible with the following software
applications (when connected to a PC):
• LOCKOUT-PRO™ Graphical Procedure Writing Software
•
CHEMLABEL™ Software
•
NetDoc Cable Management Software System
•
MarkWare ™ Tape and Label Software
• MarkWare™ EXPRESS Facility Identification Software
When used with one of these software packages, the printer will automatically
recognize all enabled and compatible materials up to 4 in. (101.6 mm) wide. For
operation of the printer with other software, refer to the documentation for your
application.
Note: Only BBP31™ supplies will work with this printer.
System Specifications
• Weight : 15 lbs (6.8 kg)
•
Dimensions (stored): 8.9 in. x 12.0 in. x 9.5 in. (22.6 cm x 30.5 cm x 24.1 cm)
•
Operating Temperature : 50 - 104°F (10-40°C)
•
Relative Humidity : 10% to 80% RH non-condensing
•
Storage : -4 to 122°F (-20 to 50°C) at 15% to 90% RH non-condensing
•
Voltage : 90 to 264 VAC, 47 to 63 Hz
•
Print Resolution : 11.8 dot/mm, 300 dpi
•
Output media size : 0.5 in. to 4 in. (12.7 mm to 101.6 mm)
•
Maximum label length (continuous media): 9.8 ft (3 m)