BBP™31 Sign & Label Printer
User Guide
8-5
Printer Maintenance
Cleaning the Printer
Cleaning the Cutter Blade
Note: When cleaning the cutter, you should also clean the media and cutter
sensors.
Materials Required
• BBP31 Cleaning Kit (Cat # B31-CCT)
• Isopropyl Alcohol
• Cutter Cleaning Tool (included in cleaning kit)
To clean the cutter:
1. Remove power and media from the printer (see Removing Power and Media
from Printer on page 1).
2. Squeeze the two yellow cutter tabs [6] to release the cutter. The cutter
mechanism and exit chute [7] will slide down behind the ribbon cover.
3. Fill the plastic bottle from the cleaning kit with isopropyl alcohol.
To Next Page
Loading...
