4-26 BBP™31 Sign & Label Printer
User Guide
Handling Objects
Sizing Objects
Sizing Objects
Use this procedure to set the object size. Objects can be sized by using the size
buttons, dragging objects to size or setting object label length and width.
Note: Sizing an object too large may cause it to overlap or cover other objects in
the Editor.
Use Size Buttons
To use the size buttons:
1. In the Editor, select the object you want to resize.
2. In the Toolbar, touch increase or decrease button. Increasing or
decreasing the object size with the Size buttons results in proportional resizing
only.
Note: For barcode objects, resizing occurs only in the direction of the barcode
bars (usually the vertical direction, unless the barcode has been rotated).
3. Repeat Step 2 until the object is the size you want.
To Next Page
Loading...
