Name: Brother DCP-8152DN
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2-55

Confidential

 Error code A400

The ADF cover sensor detected that the ADF cover was open.

 Error code A500

When scanning the fax, white or black correction data for the first side CIS was not within the

correct range.

Error code A600

Although operation was retried due to error A500 that occurred while scanning the fax, white

or black correction data for the first side CIS was not within the correct range.

Cover is Open

Close the ADF Cover.

• Close the ADF cover.

Step Cause Remedy

Connection failure of the ADF

sensor PCB harness

Reconnect the ADF sensor PCB harness.

Tab to push the ADF cover

sensor is broken.

Replace the ADF cover.

ADF sensor failure Replace the ADF cover/document detection

sensor PCB ASSY.

4 Main PCB failure Replace the main PCB ASSY.

Scan Unable

Remove the original document. Turn the power off, then on again.

Scan Unable A6

See Troubleshooting and routine maintenance chapter in User's Guide.

Step Cause Remedy

Incorrect correction data for

first side CIS

Execute function code 55.

2 First side CIS unit failure Replace the first side CIS unit.

3 Main PCB failure Replace the main PCB ASSY.

Questions and Answers:

Need help?

Do you have a question about the Brother DCP-8152DN and is the answer not in the manual?

Brother DCP-8152DN Specifications

General