Brother DCP-8152DN

7-16
Confidential
2.6 Paper feeding kit 2
(1) Remove the two taptite bind B M4x12 screws from the paper tray 2.
(2) Lift the plate to remove "A" on the T2 tray indicator from the plate, remove the four
bosses, and then remove the T2 tray cover ASSY from the paper tray 2.
Fig. 7-21
(3) Release the two hooks on the T2 separation pad ASSY from the paper tray 2.
(4) Push both arms of the T2 separation pad ASSY in the direction of the arrows to remove
both pins, and then remove the T2 separation pad ASSY from the paper tray 2.
(5) Remove the T2 separation pad spring from the T2 separation pad ASSY.
Fig. 7-22
Taptite bind B M4x12
T2 tray indicator
Paper tray 2
“A”
Plate
T2 tray cover ASSY
Bosses
Bosses
T2 separation pad ASSY
Hook
Arm
T2 separation
pad spring
Hooks
Paper tray 2
Arm
Pin
Pin
Hook