2-23
Confidential
Error
codes
Problem
Refer
to:
Error
codes
Problem
Refer
to:
E100 Program error 2-64 F100 An unidentified error occurred. 2-68
E200
When the center thermistor of the
fuser unit is higher than the idle
temperature, the side thermistor
detected a temperature higher
than the specified temperature.
2-65 F200 An unidentified error occurred. 2-68
E300 An unidentified error occurred. 2-65 F300 An unidentified error occurred. 2-68
E400 An unidentified error occurred. 2-65 F400 An unidentified error occurred. 2-68
E600
Write error in the EEPROM of
the main PCB
2-65
F500 An unidentified error occurred. 2-68
E700 An unidentified error occurred. 2-66 F600 An unidentified error occurred. 2-68
E800 An unidentified error occurred. 2-66 F800 An unidentified error occurred. 2-68
E900 An unidentified error occurred. 2-66 F900
The country code was not
entered correctly.
2-68
EA00 An unidentified error occurred. 2-66 FA00 An unidentified error occurred. 2-68
EB00 An unidentified error occurred. 2-66 FB00 An unidentified error occurred. 2-68
EC00 Detected a main fan failure. 2-66
FC00 An unidentified error occurred. 2-68
ED00
Communication between the
wireless LAN PCB and the main
PCB cannot be established at
machine startup.
2-66
FD00 An unidentified error occurred. 2-68
EE00
Detected communication failure
after communication between
the wireless LAN PCB and the
main PCB was established.
2-67
FE00 An unidentified error occurred. 2-68
EF00
Unstable power supply was
detected.
2-67
FF00 An unidentified error occurred. 2-68
F000
Malfunction of the flash memory
on the main PCB
2-67
To Next Page
Loading...
Need help?
General
